Inventory Unit Detail
2009 Case IH 5088
This is Getting Noticed! 3 people viewed in last 7 days
$118,500.00
Overview
New/Used Used
Usage2696 Hours
Availability
In Stock
LocationTrueman-Welter's Tractor and Equipment
Stock #
502076
Condition
Good
Product Features
Dealer Notes
just in, contact us to verify availability
2696 engine hours
2004 separator hours
Folding grain hopper
Front duals
2wd
2696 engine hours
2004 separator hours
Folding grain hopper
Front duals
2wd
Description
- Simple, superior harvesting
- Industry-leading AFX rotor
- Adapts to over 80 grain types
- Maximizes grain quality and savings
- Matched capacity through all systems
- Fewest drive components
Specifications
- Combine Class: Class V
- Rated power: 265 hp (198 kW)
- Horsepower rise/boost: 25/0 hp (19/0 kW)
- Maximum horsepower: 290 hp (216 kW)
- Engine displacement: CDC 8.3L
- Fuel tank: 250 gal. (945 l)
- Rotor diameter: 30 in. (762 mm)
- Grain tank: 250 bushel's (8810 l)
- Unload rate: 2.5 bu. sec. (88 l/sec.)
- Rotor drive: Belt; 3-speed gearbox
- Belt width: 2.25 in. (57 mm)
- Total cleaning area: 7,947 cu. in. (5.1 m2)
- Cleaning system: Fixed
- Feeder width: 46 in (1155 mm)
- Wheelbase 2WD: 150.2 in. (3816 mm)
- Wheelbase PGA: 150.2 in. (3816 mm)
- Weight: 32,710 lbs. (14 837 kg)
Header Compatibility
- 2010 Grain Heads: 20, 25, 30 ft.
- 2020 Flex Heads: 20, 25, 30 ft.
- 3400 Cornheads: 3406, 3408
- 2600 Cornheads: 2606
- 2142 Draper: 25, 30 ft.
- 2152 Draper: 25, 30 ft.
- 2016 Pickup: 14 ft.
AFX Rotor Design
- Standard 30-in. (76-cm) diameter in-line rotor offers gentle, multiple-pass grain-on-grain threshing:
- Single concentric moving part for threshing and separating requires fewer adjustments and less maintenance than conventional machines
- Efficiently moves material through the rotor cage – regardless of crop or conditions – to maintain crop flow and crop control
- Multiple-pass threshing and 360 degree centrifugal-force separation results in:
- More complete, gentle threshing
- Increased grain separation
- Less damage to fragile kernels
- Smooth uninterrupted crop flow:
- Reduces horsepower demands
- Decreases fuel use
- Reduces wear on threshing components
Optional Small Tube Rotor
- Small Tube (ST) rotor is standard for rice and optional for small grains producers
- Provides increased productivity in tough harvest conditions
- Smaller diameter and taller rasp bars let more tough rice straw work its way through the entire length of the rotor
- Crop feeds more evenly
- More crop-on-crop threshing opportunity
- Recent improvements enable:
- Higher grain quality in tough threshing conditions
- Higher ground speeds that boost productivity
- Easier operation, with smoother material flow
- Less rumbling, so reduced likelihood of slugging the rotor
- Available on 20 Series and 7088
Feeder/Header Interface
- All Axial-Flow combines have a common feeder/header interface
- Incorporates single-point header latching, a hydraulic multi-coupler and an electrical connection
- Makes header attachment faster, easier and safer
- Optional Terrain Tracker provides optional header lateral tilt
- Allows header to follow ground contours as it pivots to increase your harvest efficiency
- Provides 5 degrees of tilt each way, for 10 degrees of movement
- Available on all Axial-Flow models
Feeder Chains
- All models equipped with serrated 1/4-in. (1/3-cm) feeder slats for consistent feeding
- Serrations are rolled into the slat to reduce the chance of grain damage
- Spring-loaded feeder chain tensioning system with a quick visual gauge
- Standard on all Axial-Flow combines
- Provides consistent chain tension
- Provides a quick visual indication of chain tension
- Reduces noise
- Virtually eliminates routine adjustment
- Increases chain life
- Three-strand feeder chain on 88 Series combine
- Four-strand feeder chain and three-slat conveyer design on 20 Series machines
- Increases feeder chain reliability and durability
Rotor Transition Cone
- Simple geometry gently transitions crop from feeder to rotor with no moving parts
- Crop smoothly accelerates in a spiral motion
- From feeder speed to threshing speed - 5 mph (8 kph) to about 60 mph (97 kph)
- Without congestion, while promoting grain quality
- Ensures maximum combine capacity and performance
- While drawing crop into the combine transition cone, the rotor impeller system draws 1,100+ cu. ft. of air per minute ensuring a clear view of the header
Rotor Cage
- Single in-line Axial-Flow rotor coupled with a concentric rotor cage
- Delivers gentle, multiple pass, grain-on-grain threshing
- The hallmark of an Axial-Flow machine for over 30 years
- Exclusive adjustable rotor cage vanes
- Allow you to customize crop flow to conditions for maximum performance and productivity
- Vanes have three positions: fast, mid and slow
- Crop control provides uniform crop flow and more consistent power needs while reducing peak horsepower and consuming less fuel
Rotor Concave/Module Wrap
- One of the most important elements affecting combine capacity
- Instead of longer rotors, Case IH Axial-Flow combines use concave/module wrap to increase capacity
- 5088, 6088 and 7088 combines include a one-piece 156 degree concave wrap
- Concave/module wrap provides a longer, more efficient threshing/separating zone for optimum threshing and separating capacity
- Electrically operated concave/module adjustment is monitored by the in-cab position display
88 Series Concave and Grate Options
- Multiple concave and grate options let you easily adapt 88 Series combines to handle different crops and conditions
- Small Wire
- Large Wire
- Keystock
- Slotted
- Solid
Cross-Flow Cleaning Fan
- Patented Case IH Cross-Flow® cleaning fan delivers extremely uniform air flow
- Creates a vortex at its center, resulting in uniform air flow across the entire sieve
- Ensures a clean sample at high harvest speeds
- Maximizes grain savings
- Redesigned fan air inlet shields maintain cleaning fan performance in adverse conditions
88 Series Augers & Sieves
- Auger bed of five augers delivers crop smoothly to the grain pan and cleaning area
- Chaffer sieve has three adjustable sections
- Allows easy fine-tuning for different harvest conditions
- Eight different sieve combinations let you clean most any crop
- Front, middle and rear sections adjust independently for better performance
- Lower and upper sieve sections move in opposite directions for better cleaning
- Several sieve choices are available for maximum cleaning and grain savings
- Convenient sieve access door and light allow easy inspection
- External right-hand sieve adjustment levers are provided for added convenience
- Optional hillside dividers are available for the top sieve and grain pan to improve operating performance in hilly terrain
In-Cab Sieve Adjustment
- Lets you fine-tune sieves from the operator's seat
- Optional on 88 Series combines
Automatic Crop Settings
- On 88 Series combines the automatic crop settings (ACS) option:
- Uses the electrically adjusted upper and lower sieves, plus rotor speed, concave position and fan speed to quickly set the combine for each crop harvested
Grain Tanks
- Axial-Flow combines feature larger grain tank capacities:
- 350-bu. (12,330-L) grain tank on the 8120 and 9120
- 315-bu. (11,100-L) grain tank on 7120 model
- 300-bu. (10,570-L) grain tank on the 6088 and 7088
- 250-bu. (8,810-L) grain tank on the 5088
- All Axial-Flow combines include:
- Standard, quick-folding grain tank extensions that don't require tools
- An optional in-cab folding grain tank extension package
- Allows for one-switch control of folding without sacrificing overall grain tank capacity
- Inclined delivery auger folds in conjunction with grain tank extensions - in less than one minute, with no tools
- Makes easy work of switching from field to transport
Clean Grain Elevator Capacity
- Industry-leading 6,000-bu. (211,434-L) per hour clean grain elevator on 7120, 8120 and 9120 combines
- Features paddles that measure 5 x 10 in. (13 x 25 cm)
- Ensures sufficient capacity in the toughest corn crop
- Clean grain elevator capacity has increased 15%, to 3,450 bu. (121,575 L) per hour, on 88 Series combines
- Resulting in higher productivity without compromising grain quality or increasing horsepower requirements
- 88 Series combines feature:
- Improved elevator inlet geometry
- A larger clean grain cross auger - increased 1/2 in. (1 1/4 cm) diameter
- Redesigned inclined delivery auger
- Elevator tensioning, including yield monitor load sensor, is adjusted at ground level using a single wrench
Unload Augers
- 5088, 6088 and 7088 models have 18-, 21- and 24- ft. (5-, 6-, 7-m) unload auger options and a 3.0-bu. (106-L) per sec unload rate
- To aid in clean-out, standard full-length clean grain and tailings cross-auger troughs drop down easily with improved access
- Adjustable, no-tools required, spring loaded latched auger tent covers allow easy adjustment to match desired unload rate and reduced torque load
- Heavier grain tank cross auger drive chains and sprockets extend performance and service life
- Auger lengths on all Axial-Flow models allow you to maintain a comfortable distance between the header and the grain cart while unloading on the go
Residue Management Systems
- 88 Series combines feature:
- A two-speed spreader drive design, enhanced with a spring-loaded, over-center tensioner that allows for quicker spreader speed changes
- Longer spreader shafts and surround curtains for consistent, even residue spreading
- A two-position straw hood that aids in windrow formation
Wheelbase
- A longer wheelbase on 88 Series combines supports larger headers without additional rear ballast
- Wheelbase has increased from 141.2 - 150.2 in (358.6 - 381.5 cm) for increased stability and smoother operation
- All 88 Series combines feature a 60/40 front/rear weight distribution - so no ballast is required for any approved Case IH header
Axles: Bigger and Stronger
- All Axial-Flow models can be equipped with optional rear power-guide axle for increased traction and mobility
- On 88 Series models, powered and non-powered rear axles incorporate a common center section with increased strength
- Non-powered guide axle features an offset kingpin design for improved turning radius for larger tires
- On the 5088 and 6088, the front axle-tube cross-section is larger to support larger headers and grain tank capacity
Engine Specs
- All Axial-Flow combine engines include:
- Full-authority, electronic fuel injection systems that improve performance, reliability and fuel efficiency - for running at optimum harvest speed
- Cross-Flow® head design that maximizes efficiency by positioning the intake and exhaust manifold on opposite sides of the engine, allowing cooler air to be used
- Efficient air cleaner design that improves engine performance - and a filter location that makes for easy servicing
- Engine grid heater, activated by the ignition switch, preheats the engine air for cold-weather starting
- Wet-sleeve, mid-stop liners provide uniform temperature and top efficiency to extend engine life
- The Axial-Flow 88 Series utilizes a flat stationary screen with a rotating wand and powered evacuation system for cleaner radiator, coolers and engine intake systems.
Power Rise
- Standard on all Axial-Flow combines
- Provides additional horsepower to help the operator power tackle tough green-stem soybeans, green rice, tough wheat straw, or unload on the go without losing speed or productivity
Power Boost
- Axial-Flow® combines are powered by proven, reliable, fuel-efficient engines, from the same engine families you'll find in Steiger® and Magnum™ tractors. They're powerful, turbocharged and aftercooled, Tier III compliant and approved for bio-diesel blends.
88 Series Feeder and Rotor Drives
- Field-proven feeder drive system uses a simple, inline drive belt design
- Protected by a large capacity slip clutch
- Optional two-speed header drive
- Increases header/feeder capacity
- Increases header speed by 15% for increased productivity
- High-capacity hydraulically-driven feeder reverser
- Provides positive reversing with up to 1,200 foot-pounds of drive torque
- Gives you the power and torque you need
- The 6088 and 7088 rotor drive features four-strand, three-inch Kevlar belt with extra large pulleys
- Three-speed gear box provides
- Maximum belt wrap for less slippage and greater durability
- Efficient power transfer from engine to rotor
- Rotor speed overlap for longer belt life
- Improvements allow for higher torque loads and longer component life
Tires
- All Axial-Flow combines are offered with a wide variety of tire options to meet your demands, while providing unmatched traction, propulsion, power and flotation
- Axial-Flow combines can be equipped with tires from:
- Firestone
- Goodyear
- Michelin
- Tires are offered in a wide selection of sizes to suit:
- Row crops
- High flotation
- Small grains
- Specialty applications
- Offers full drive effort to slipping wheels to power through tough conditions
Cab Comfort
- Focalized cab mounting shields you from vibrations
- Automatic climate control system keeps the temperature constant
- Standard air suspension seat with left-hand armrest and removable seat cushion
- Seat controls are right up front for easy adjustment
- Optional red leather heated seat, like the legendary Steiger® and Magnum™ tractors
- Right-hand console adjusts to your favorite position, then moves in tandem with the seat
- User-friendly controls give you maximum convenience with minimum effort
- Adjustable multi-function propulsion lever
- Developed from fighter pilot research and design
- Provides resume and shift features for increased functionality
- Gives you control of six vital harvest functions with the touch of your thumb
- Flip a switch to control 10 additional functions
88 Series Cab
- The 88 Series cab gives you:
- 55 sq. ft. (5 sq. m) of total glass
- Optional AFS® Pro 600 display, which provides yield and moisture monitoring, data logging, mapping and autoguidance, as well as incorporating Automatic Crop Settings (ACS)
- ACS option lets you preset the machine for rotor and fan speeds, concave clearance and sieve openings - and make adjustments from your seat
- New A-Post monitor design incorporates common features of Steiger® and Magnum™ tractors, with increased combine functionality and performance boosting features, such as monitoring percent of engine load and grain loss displays
- New wheat color interior to match the entire Case IH fleet of machines
Lighting
- All Axial-Flow combines have optional High Intensity Discharge (HID) lighting packages
- Two and six HID lighting packages offer farming in high definition
- Gives you unprecedented clarity and visibility during night-time operations - both ahead of the cutter bar and behind
- Oval light design on 88 Series combines
- Incorporates the style and functionality of the Axial-Flow family
AFS Pro 600 Display
- This large touch-screen color display provides:
- On-the-go yield monitoring
- Yield logging
- On-screen, real-time yield and moisture mapping
- Automatic Crop Setting (ACS) monitoring and control
- Portable and customizable, so you can use it on AFS AccuGuide™ autoguidance systems on Case IH tractors and planters to:
- Provide curved and straight line guidance
- Control implement functions
- Control variable-rate planting and seeding based on a prescription map
GPS Receiver
- Provides signals for differential corrections
- Capable of receiving WAAS/EGNOS, OminSTAR XP, OminSTAR HP and RTK signals
- Fully portable with quick-release latches
- Upgrade your GPS correction signal with
- Case IH RTK GPS base station - corrects GPS signals from government satellites for sub-inch accuracy
- OmniStar XP/HP subscription - for 2 - 5-in. (5 - 13-cm) accuracy
Engine
Horse Power | 265 hp (198 kW) |
General
Weight | 32,710 lbs. (14 837 kg) |